Concrete pool decks in Walnut Creek CA - a deck that grips when it's wet
Slick, cracked or too hot to stand on? We pour and resurface pool decks that grip when wet and are easier on bare feet.
- Fully licensed and insured.
- Free in-person estimates.
- We reply within 1 business day.
What goes into a concrete pool deck in Walnut Creek?
A concrete pool deck is the flat slab around your pool, and in Walnut Creek, CA we form, pour and finish it so it sheds water, grips when it's wet and is easier on bare feet.
Most people call us because the old deck has cracked, sunk near the pool or turned slick, or because a new pool is going in and needs a deck around it. The price moves with the size of the deck, whether the old concrete comes out or gets resurfaced, how much base work sits under it and the finish you pick, from a plain broom finish, the light texture you see on most walks, to decorative concrete. The schedule turns on tear-out, the weather and curing, the wait while the concrete gains strength before anyone walks on it, and if the pool is new, on when the pool builder is done. At the estimate I measure it, look at what's underneath and write out each part so you can see what you'd be paying for.
How do you know your pool deck needs work?
Cracks or a sinking edge
Cracks that keep growing, or a deck that has dropped along the pool edge, usually mean the ground under it has settled or the slab never had joints to crack along. The longer it waits, the more water gets under it, and the edges start to chip and catch toes.
Water that won't drain
Puddles that sit long after everyone is out of the pool mean the deck has low spots, either from how it was poured or from settling since. Standing water leaves a slippery film and stains, and it gets worse each season.
A surface gone slick
If the deck feels smooth or glassy when it's wet, the texture has worn off or someone put a glossy coat on it. That's the one sign I wouldn't wait on, because a fall on concrete next to a pool is a bad fall.
How we build and resurface concrete pool decks
Around a pool, how the deck grips when it's wet and how hot it gets under bare feet matter more than shine, so I'll steer you toward finishes and colors that work for that before we talk about anything else. If your old deck is in decent shape, I'll tell you whether resurfacing makes more sense than tearing it out. For a new pour, we break out the old concrete, dig down and pack the subgrade, the ground the slab sits on, because a base that's only raked level settles with the dirt and takes the deck with it. We set the forms so the deck falls away from the house and the pool, lay in rebar, the steel that keeps cracks from spreading apart, and pour in the cool of the morning so the top doesn't dry out weak and dusty. Then we texture the surface for grip, cut control joints, grooves that give the concrete a straight place to crack instead of a random one, and let it cure. If the budget gets tight, I'd rather you go plainer on the finish than cheap on the base, because nobody sees the base on day one and everybody finds out about it later.
Pool projects often need more than the deck. If yours steps down to the lawn or up to the back door, we can build concrete steps that tie into it, and if a pool house or equipment shed is part of the plan, we handle the slab foundation building for that too.
Tear out and pour new
This suits a deck that's badly cracked, sunk or holding water, because those problems start in the base and a coating can't reach them. It's the bigger job, but it's the only way to fix what's underneath.
Resurface the deck you have
This suits a deck that's solid and flat but worn, stained or slick on top. We lay a new textured coating over the old concrete, which costs less than a new pour and keeps the yard torn up for less time.
Get a written estimate for your pool deck
Send the form and we'll get back to you within one business day to set a time. I come out, look at the deck and give you a free written estimate with no obligation.
- Based in
- Walnut Creek, CA 94596
- Hours
- Mon–Fri: 7 AM–11 PM, Sat–Sun: 6 AM–10 PM
What happens when you call about a pool deck in Walnut Creek?
Here's how a pool deck job runs with us, from your first call to walking the finished deck together.
Call or send a message
Tell us a little about the deck and the pool, and we set a time for me to come out. If you can, have the rough size, a few photos and whether the pool is new.
I look and write it up
I walk the deck and the yard, ask how you use the pool and check whether the old concrete is worth resurfacing. The written estimate breaks out tear-out, base work and finish, so you can see what each choice costs before you decide.
We line up permits and dates
If a permit, an engineer or a designer is part of the job, we get that sorted before we put your pour on the calendar. A weekday pour is simpler, because Walnut Creek requires an after-hours permit for construction on Saturdays and city holidays, and a weekend date adds that step.
We pour and walk it
We do the work and walk the finished deck with you when it's done. Before we leave, I'll tell you when it's ready for bare feet and when the pool furniture can go back.
Why Walnut Creek homeowners call us for pool decks
I come out to every job
I look at every job myself, and my crew does the work with me on site. The person who told you what's under your deck is the same one standing there when it's poured.
Fully licensed and insured in California
California requires a state contractor's license for any job that totals $1,000 or more, needs a building permit or uses hired workers, and a pool deck clears that bar quickly. We're fully licensed and insured, so you're not taking a chance on who's working in your yard.
Straight answers since 2023
I started this business in 2023 after learning the trade on crews around the East Bay, and I give the hard news at the estimate. If your deck isn't worth redoing yet, or a cheap fix won't last, I'll say so before you spend anything.
Before you pick a finish, I'd want to see the deck and hear how your family uses the pool. Send us a message or call (925) 532-0140 to set that up.
Pool decks, permits and backyard work in Walnut Creek
Walnut Creek says concrete flatwork on private property needs no permit, flatwork meaning flat slabs like patios and walks, and its list names a patio, a driveway and a path but not a pool deck, so that list alone doesn't settle your job. City staff will tell you by phone at 925-943-5834 whether your work needs no permit, and I'll raise the question at the estimate. If your deck does need one, we handle the application with the city, which takes a permit signed by the legal property owner or a California licensed contractor.
A lot of the decks we're asked about here sit around pools that have been in the ground for years, where the concrete has worn slick or settled at the edges while the pool itself is fine. Many of those backyards slope, so we figure out where the water off the deck will go before we set forms, the same as we do on jobs in Lafayette and Orinda.
Questions about pool decks in Walnut Creek
Does a pool deck need a permit in Walnut Creek?
The city's no-permit list for flatwork doesn't name pool decks, so treat it as an open question until it's checked with city staff, as we explain above. I'll bring it up at the estimate, and if one is needed, we handle it.
How much does a concrete pool deck cost in Walnut Creek?
A concrete pool deck in the San Francisco Bay Area usually costs about $7 to $12 per square foot of deck. Where yours lands depends on whether the old concrete comes out, how much base work it needs and the finish you pick. I'll give you a written figure for your own deck at the estimate.
Can my old concrete pool deck be resurfaced instead of replaced?
Often it can, if the old deck is a good candidate, meaning it's solid and flat underneath. One concrete guide calls resurfacing a cost-effective way to refresh a deck and fix surface flaws, so it's worth asking about before you price a full replacement. I'll check yours and tell you which way I'd go.
What is the best finish for a concrete pool deck?
The best finish is one that keeps its grip when it's wet, which usually means a textured surface. Highly polished concrete can be a poor fit around a pool unless it's part of a designed non-slip system, so if you want a glossy look, plan for that system from the start rather than adding it later.
What color concrete pool deck is best for bare feet?
A lighter color is usually the safer pick, because darker decorative finishes can get very hot in direct sun. Around a pool where everyone walks barefoot, how the deck feels underfoot matters as much as how it looks, and I'll show you options with that in mind.
What causes a concrete pool deck to crack around a new pool?
The most common cause is settling in the fill placed back around a new pool shell, when that fill wasn't put in and packed properly. The deck and the pool can also move differently, so movement joints, which let the deck shift on its own, help keep it from pushing against the pool or its coping. If your pool is new, I'll ask how the backfill was done before we pour.
Other concrete work that goes with a pool deck
Concrete steps construction
Where a pool deck meets the back door or a lower yard, new steps can match its texture so the grip stays the same underfoot.
Slab foundation building
A pool house, cabana or equipment shed needs a slab built to carry walls and a roof, which takes more base work than a deck does.
Cities where we pour and resurface pool decks
Walnut Creek Concrete Works is based in Walnut Creek, California, and works across the 12 cities listed here, from Pleasant Hill to San Ramon. These are the cities with their own page, and we work in others around them too.
Get your pool deck estimate on the calendar
A rough size, a few photos and whether the pool is new let me walk in ready to talk about resurfacing or a new pour.